|
|
|
|
Row Boat
|
$4.95
|
|
|
|
All Categories
Props
Vehicles
Boats
| |
Item Description
A small row boat, the aim was to try and fit a party of four in the boat, but with a 1 inch base there doesn't seem to be enough space.
I've included a boat with no character slots (so it can be used as scenery), a boat with one character slot and one with two slots.
The bottom can be printed separately in the print variation, so the boat can lay flat on a flat surface.
I've also added a simple model of an oar so that it can print without any assembly or supports. |
Base Object
Included Files:
BaseGeo/NoSlots/RowBoat.stl BaseGeo/Oar/RowBoatOar.stl BaseGeo/OneSlot/RowBoatOneSeater.stl BaseGeo/TwoSlots/RowBoatTwoSeater.stl
PrintVariation1 FDM
Notes
|
Minimum Required Bed Size: X: 14mm Y: 42mm Z: 88mm |
Included Files:
PrintVariation1_FDM/NoSlots/RowBoat.Part_1.stl
PrintVariation1_FDM/NoSlots/RowBoat.Part_2.stl
PrintVariation1_FDM/Oar/RowBoatOar.SinglePart.stl
PrintVariation1_FDM/OneSlot/RowBoatOneSeater.Part_1.stl
PrintVariation1_FDM/OneSlot/RowBoatOneSeater.Part_2.stl
PrintVariation1_FDM/TwoSlots/RowBoatTwoSeater.Part_1.stl
PrintVariation1_FDM/TwoSlots/RowBoatTwoSeater.Part_2.stl
PrintVariation2 SLA
Notes
Included Files:
PrintVariation2_SLA/NoSlots/RowBoat.SinglePart.stl
PrintVariation2_SLA/Oar/RowBoatOar.SinglePart.stl
PrintVariation2_SLA/OneSlot/RowBoatOneSeater.SinglePart.stl
PrintVariation2_SLA/TwoSlots/RowBoatTwoSeater.SinglePart.stl
PrintVariation3 SLA
Notes
- Pre Supported.Flat bottoms
|
Included Files:
PrintVariation3_SLA/RowBoat.SinglePart.stl
PrintVariation3_SLA/RowBoatOar.SinglePart.stl
PrintVariation3_SLA/RowBoatOneSeater.SinglePart.stl
PrintVariation3_SLA/RowBoatTwoSeater.SinglePart.stl
|
|
|
|
|
|
|
