Modular Cemetery Gates

$14.95

All Categories Scenery Barriers

❮

❯

Item Description

A modular set of gates that could be used for a cemetery or a garden or palace/mansion.

All three gates have been designed to have gates that open and close on hinges, this is done by printing the gates in two parts and glueing them together with the gates sitting in the hinges.

All modular parts have small slots to fit 2x1mm magnets to make the pieces connectable.

There are three different size pillars. Large, medium and small. Large pillars have magnet slots on top to fit a selection of four different accessories to decorate the pillars.

A Smaller nozzle is recommended for this one to get all the fence details, and also a good calibration of the first layer so things dont turn out flat and for the hinges to work.

The four decorations include:

Plain top

Lamp

Orb

Gargoyle

Base Object

Included Files:

BaseGeo/Corner/PillarCorner.stl

BaseGeo/Corner/PillarMediumCorner.stl

BaseGeo/Corner/PillarSmallCorner.stl

BaseGeo/End/PillarMediumEnd.stl

BaseGeo/End/PillarSmallEnd.stl

BaseGeo/End/PillarTallEnd.stl

BaseGeo/End/TerminatorLarge.stl

BaseGeo/Gate/GateLarge.stl

BaseGeo/Gate/GateMedium.stl

BaseGeo/Gate/GateSmall.stl

BaseGeo/Ornament/PillarTopBlank.stl

BaseGeo/Ornament/PillarTopGargoyle.stl

BaseGeo/Ornament/PillarTopGlobe.stl

BaseGeo/Ornament/PillarTopLamp.stl

BaseGeo/Single/PillarMedium.stl

BaseGeo/Single/PillarSmall.stl

BaseGeo/Single/PillarTall.stl

BaseGeo/Straight/FencePlain_20mm.stl

BaseGeo/Straight/FencePlain_40mm.stl

BaseGeo/Straight/FenceWall_20mm.stl

BaseGeo/Straight/FenceWall_40mm.stl

BaseGeo/Straight/PillarMediumStraight.stl

BaseGeo/Straight/PillarSmallStraight.stl

BaseGeo/Straight/PillarTallStraight.stl

BaseGeo/TIntersection/PillarMediumTIntersection.stl

BaseGeo/TIntersection/PillarSmallTIntersection.stl

BaseGeo/TIntersection/PillarTallTIntersection.stl

PrintVariation1 FDM

Notes

Assembly required.
Recommended to print at high resolution for smooth results.
For best results, this print will require you to have a well calibrated first layer to prevent peices from printing too flat.
Print flat on bed with no raft so both sides have a flat mating surface when glueing together.

Minimum Required Bed Size: X: 37mm Y: 152mm Z: 132mm

Included Files:

PrintVariation1_FDM/Corner/PillarCorner.SinglePart.stl

PrintVariation1_FDM/Corner/PillarMediumCorner.SinglePart.stl

PrintVariation1_FDM/Corner/PillarSmallCorner.SinglePart.stl

PrintVariation1_FDM/End/PillarMediumEnd.SinglePart.stl

PrintVariation1_FDM/End/PillarSmallEnd.SinglePart.stl

PrintVariation1_FDM/End/PillarTallEnd.SinglePart.stl

PrintVariation1_FDM/End/TerminatorLarge.SinglePart.stl

PrintVariation1_FDM/Gate/GateLarge/GateLarge.Part_1.stl

PrintVariation1_FDM/Gate/GateLarge/GateLarge.Part_2.stl

PrintVariation1_FDM/Gate/GateLarge/GateLarge.Part_3.stl

PrintVariation1_FDM/Gate/GateLarge/GateLarge.Part_4.stl

PrintVariation1_FDM/Gate/GateLarge/GateLarge.Part_5.stl

PrintVariation1_FDM/Gate/GateLarge/GateLarge.Part_6.stl

PrintVariation1_FDM/Gate/GateMedium/GateMedium.Part_1.stl

PrintVariation1_FDM/Gate/GateMedium/GateMedium.Part_2.stl

PrintVariation1_FDM/Gate/GateMedium/GateMedium.Part_3.stl

PrintVariation1_FDM/Gate/GateMedium/GateMedium.Part_4.stl

PrintVariation1_FDM/Gate/GateMedium/GateMedium.Part_5.stl

PrintVariation1_FDM/Gate/GateMedium/GateMedium.Part_6.stl

PrintVariation1_FDM/Gate/GateSmall/GateSmall.Part_1.stl

PrintVariation1_FDM/Gate/GateSmall/GateSmall.Part_2.stl

PrintVariation1_FDM/Gate/GateSmall/GateSmall.Part_3.stl

PrintVariation1_FDM/Gate/GateSmall/GateSmall.Part_4.stl

PrintVariation1_FDM/Gate/GateSmall/GateSmall.Part_5.stl

PrintVariation1_FDM/Gate/GateSmall/GateSmall.Part_6.stl

PrintVariation1_FDM/Ornament/PillarTopBlank.SinglePart.stl

PrintVariation1_FDM/Ornament/PillarTopGargoyle.SinglePart.stl

PrintVariation1_FDM/Ornament/PillarTopGlobe.SinglePart.stl

PrintVariation1_FDM/Ornament/PillarTopLamp.SinglePart.stl

PrintVariation1_FDM/Single/PillarMedium.SinglePart.stl

PrintVariation1_FDM/Single/PillarSmall.SinglePart.stl

PrintVariation1_FDM/Single/PillarTall.SinglePart.stl

PrintVariation1_FDM/Straight/PillarMediumStraight.SinglePart.stl

PrintVariation1_FDM/Straight/PillarSmallStraight.SinglePart.stl

PrintVariation1_FDM/Straight/PillarTallStraight.SinglePart.stl

PrintVariation1_FDM/Straight/FencePlain_20mm/FencePlain_20mm.Part_1.stl

PrintVariation1_FDM/Straight/FencePlain_20mm/FencePlain_20mm.Part_2.stl

PrintVariation1_FDM/Straight/FencePlain_40mm/FencePlain_40mm.Part_1.stl

PrintVariation1_FDM/Straight/FencePlain_40mm/FencePlain_40mm.Part_2.stl

PrintVariation1_FDM/Straight/FenceWall_20mm/FenceWall_20mm.Part_1.stl

PrintVariation1_FDM/Straight/FenceWall_20mm/FenceWall_20mm.Part_2.stl

PrintVariation1_FDM/Straight/FenceWall_40mm/FenceWall_40mm.Part_1.stl

PrintVariation1_FDM/Straight/FenceWall_40mm/FenceWall_40mm.Part_2.stl

PrintVariation1_FDM/TIntersection/PillarMediumTIntersection.SinglePart.stl

PrintVariation1_FDM/TIntersection/PillarSmallTIntersection.SinglePart.stl

PrintVariation1_FDM/TIntersection/PillarTallTIntersection.SinglePart.stl

Game Types:

Category:

Modular Cemetery Gates

Item Description

Base Object

Included Files:

PrintVariation1 FDM

Notes

Included Files:

Related Items

Shopping Cart

Wish List

Game Types:

Category:

Modular Cemetery Gates

Item Description

Base Object

Included Files:

PrintVariation1 FDM

Notes

Included Files:

Related Items