|
|
|
|
Tavern Shelves
|
$3.00
|
|
|
|
All Categories
Props
Furniture
Shelves
| |
Item Description
|
Five shelves to put in your tavern. |
Base Object
Included Files:
BaseGeo/BottleShelf.stl BaseGeo/BottleShelfWithCupboards.stl BaseGeo/KegShelf.stl BaseGeo/ShelfWithKegs.stl BaseGeo/SupplyShelf.stl
PrintVariation1 FDM
Notes
- Assembly required.
- Recommended to print at high resolution for smooth results.
- For best results, this print will require you to have a well calibrated first layer to prevent peices from printing too flat.
- Print flat on bed with no raft so both sides have a flat mating surface when glueing together.
Minimum Required Bed Size: X: 39mm Y: 50mm Z: 50mm |
Included Files:
PrintVariation1_FDM/BottleShelf/BottleShelf.Part_1.stl
PrintVariation1_FDM/BottleShelf/BottleShelf.Part_2.stl
PrintVariation1_FDM/BottleShelfWithCupboards/BottleShelfWithCupboards.Part_1.stl
PrintVariation1_FDM/BottleShelfWithCupboards/BottleShelfWithCupboards.Part_2.stl
PrintVariation1_FDM/KegShelf/KegShelf.Part_1.stl
PrintVariation1_FDM/KegShelf/KegShelf.Part_2.stl
PrintVariation1_FDM/KegShelf/KegShelf.Part_3.stl
PrintVariation1_FDM/KegShelf/KegShelf.Part_4.stl
PrintVariation1_FDM/ShelfWithKegs/ShelfWithKegs.Part_1.stl
PrintVariation1_FDM/ShelfWithKegs/ShelfWithKegs.Part_2.stl
PrintVariation1_FDM/SupplyShelf/SupplyShelf.Part_1.stl
PrintVariation1_FDM/SupplyShelf/SupplyShelf.Part_2.stl
PrintVariation2 SLA
Notes
- Pre Supported.
- Hollowed for SLA.
Minimum Required Bed Size: X: 47mm Y: 70mm Z: 71mm |
Included Files:
PrintVariation2_SLA/BottleShelf.SinglePart.stl
PrintVariation2_SLA/BottleShelfWithCupboards.SinglePart.stl
PrintVariation2_SLA/KegShelf.SinglePart.stl
PrintVariation2_SLA/ShelfWithKegs.SinglePart.stl
PrintVariation2_SLA/SupplyShelf.SinglePart.stl
|
|
|
|
|
|
|
